אודותינו ואודות הקהילה
חנות אלקטרוניקה למייקרים
מה שיש לנו לשתף בנוגע לציוד האלקטרוניקה שאנחנו מספקים למייקרים
Arducam 1/2.5″ M12 Mount 8mm Focal Length Camera Lens M2508ZH02
50.00₪ כולל מע"מ
- M12 Mount lens mainly for Arduino and Raspberry Pi cameras, please contact us for other platform.
- Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is
- What else is needed: It makes a perfect combo with “Arducam B0031 or B0103”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this lens directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required
- How to use it: Get a camera with an M12 lens holder, and screw one lens slowly into the M12 lens holder until you see a clear and sharp image on a video screen. Screw it out a little if you want to shoot objects close to the camera.
אולי נוכל לעניין אותך במוצרים נוספים?
70.00₪ כולל מע"מ
למוצר זה יש מספר סוגים. ניתן לבחור את האפשרויות בעמוד המוצר 
טווח מחירים: 285.00₪ עד 685.00₪ כולל מע"מ
למוצר זה יש מספר סוגים. ניתן לבחור את האפשרויות בעמוד המוצר 
המלאי אזל
Overview
- Optical Format: 1/2.5”
- Effective Focal Length: 8mm
- 35mm equivalent focal length: 86.5mm
- FOV on 1/2.5”sensor(D/H/V): 50°/40°/30°
- FOV on 1/2.7” sensor(D/H/V): 48°/42°/25°
- FOV on 1/2.8” sensor(D/H/V): 45°/40°/23°
- FOV on 1/2.9” sensor(D/H/V): 43°/38°/22°
- FOV on 1/4”RPi Camera(D/H/V): 32.5°/26°/19.5°
- F/NO: 2.0
- Mount: M12
- Length Holder Height: 13mm
- Size: 14mm x 16.9mm
- Weight: 7g
- IR Sensitivity: sensitive to visible light, with 650nm IR filter
Lens Specifications
Mechanical Drawing
Package Including
- Arducam 1/2.5″ M12 Mount 8mm Focal Length Camera Lens M2508ZH02
Note
- Lens Holder NOT included, you need to order it seperately.
- Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all.
Lens holder options
| SKU | Height | Hole Spacing | Material |
| U0756M16 | 16.5mm | 20.0mm | Metal |
| U0756M14 | 14.5mm | 20.0mm | Metal |
| U0756M13 | 13.0mm | 20.0mm | Metal |
| LH003 | 12.0mm | 18.0mm | Plastic |
Blog
Arducam M12 Mount Lens Kit for Raspberry Pi and Arduino Cameras
Over the past few years, Arducam has launched many camera boards for Raspberry Pi with M12 or CS-mount lens holders. One of the many features that outperformed the official ones was the interchangeable lenses, a feature also on our SPI cameras for Arduino. We are excited to announce that the Arducam M12 Mount Lens Kit […]
Video
Documentation
Introduction
A lens is used to converge the light beams to an image plane on the image sensor for an clear and sharp frame. To understand how to quickly sort out the best lens, refer to this focal length calculator page. Something You Should Know about the Lenses Focal Length Parallel incident light transmitted into a […]
Arducam M12 lens kit |
Arducam low distortion M12 lens kit |
מוצרים קשורים
