קטגוריות

Arducam 1/2.5″ M12 Mount 16mm Focal Length Camera Lens M2016ZH01

40.00₪ כולל מע"מ

M12 Mount lens mainly for Arduino and Raspberry Pi cameras, please contact us for other platform.
Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is
What else is needed: It makes a perfect combo with “Arducam B0031 or B0103”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this lens directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required
How to use it: Get a camera with an M12 lens holder, and screw one lens slowly into the M12 lens holder until you see a clear and sharp image on a video screen. Screw it out a little if you want to shoot objects close to the camera.

אולי נוכל לעניין אותך במוצרים נוספים?

Raspberry Pi Zero 2W with Header

105.00₪ כולל מע"מ

הוספה לסל

Performance kit Raspberry pi 5

החל מ-525.45₪

מידע נוסף

Raspberry Pi 27W USB-C Power Supply EU

70.00₪ כולל מע"מ

בחר אפשרויות

The next generation – Raspberry PI 5

כולל מע"מ

בחר אפשרויות

Raspberry pi 4 Kit With Argon ONE M.2 case

החל מ-501.60₪

מידע נוסף

Raspberry Pi Pico Basic Kit, MicroPython Programming Learning Kit

165.00₪ כולל מע"מ

הוספה לסל

Lens for 9 in 1 Camera Module

76.00₪ כולל מע"מ

הוספה לסל

משלוח UPS מהיר : עד 3 ימי עסקים

מק"ט: 74053 קטגוריה: עדשות

תיאור

Overview

Optical Format: 1/2.5”
Effective Focal Length:16mm
35mm equivalent focal length: 173mm
FOV on 1/2.5” sensor(D/H/V): 29°/23°/17°
FOV on 1/2.7” sensor(D/H/V): 25°/22°/12°
FOV on 1/2.8” sensor(D/H/V): 23°/20°/11°
FOV on 1/2.9” sensor(D/H/V): 20°/18°/10°
HFOV on 1/4” RPi Camera: 10°, F/NO: 2.0
Mount:M12, Length Holder Height: 13mm
Screws, specifications, and instructions for changing lens provided.
IR Sensitivity: sensitive to visible light, with 650nm IR filter

Mechanical drawing

Package including

1pcs Arducam 1/2.5″ M12 Mount 16mm Focal Length Camera Lens M2016ZH01

Note

Lens Holder NOT included, you need to order it seperately.
Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all.

Lens holder options

SKU	Height	Hole Spacing	Material
U0756M16	16.5mm	20mm	Metal
U0756M14	14.5mm	20mm	Metal
U0756M13	12.0mm	20mm	Metal
LH003	12.0mm	18mm	Plastic

Blog

Arducam M12 Mount Lens Kit for Raspberry Pi and Arduino Cameras

Posted: December 18, 2018

Over the past few years, Arducam has launched many camera boards for Raspberry Pi with M12 or CS-mount lens holders. One of the many features that outperformed the official ones was the interchangeable lenses, a feature also on our SPI cameras for Arduino. We are excited to announce that the Arducam M12 Mount Lens Kit […]

Video

Documentation

Introduction

Posted: March 20, 2019

A lens is used to converge the light beams to an image plane on the image sensor for an clear and sharp frame. To understand how to quickly sort out the best lens, refer to this focal length calculator page. Something You Should Know about the Lenses Focal Length Parallel incident light transmitted into a […]