Fan SHIM for Raspberry Pi

Make your Raspberry Pi 4 seriously cool with Fan SHIM! This solderless, 30mm controllable CPU fan with RGB LED and touch switch will give your Raspberry Pi significantly better thermal performance. It’s also silent! Note that due to the height of the fan, if you want to use HATs or pHATs with Fan SHIM, you must use a booster header. The fan can be software controlled, so you can do nifty things like turn it on when the processor hits a certain temperature. Use the LED as a convenient visual indicator to indicate fan status, CPU load / temperature, whatever! The touch switch can also be programmed, so you can use it to turn the fan on or off, or to switch between temperature triggered or manual mode. Compatible with our new Pibow Coupé 4 case for Raspberry Pi 4! The assembly is really easy and takes less than two minutes: With the component side of the circuit board facing up, push the two M2.5 bolts through the bottom holes, then screw in the first pair of nuts to secure them and act as a spacer. Push the fan mounting holes onto the bolts, with the cable side of the fan facing down (as shown) and the text on the fan facing up. Secure with two more nuts. Insert the JST connector of the fan into the socket of the SHIM fan.