קטגוריות

Raspberry Pi Pico Basic Kit, MicroPython Programming Learning Kit

165.00₪ כולל מע"מ

The Raspberry Pi Pico Basic Kit, MicroPython Programming Learning Kit offers a Dual-core Arm Cortex M0+ processor, and 264KB of SRAM, and 2MB of onboard Flash memory. It incorporates Raspberry Pi’s own RP2040 microcontroller chip, with a dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM, and 2MB of onboard Flash memory, as well as 26x multi-function GPIO pins. For software development, either Raspberry Pi’s C/C++ SDK or the MicroPython is available. There are also complete development resources and tutorials to help you get started easily, and integrate them into end products quickly.

אולי נוכל לעניין אותך במוצרים נוספים?

משלוח UPS מהיר : עד 3 ימי עסקים

מק"ט: 73098 קטגוריה: ערכות לראספברי פיי תגיות: מוצרים מובילים

תיאור

Raspberry Pi Pico Basic Kit

Basic entry-level kit prepared for Pico

Tested And Selected By Professional Engineer, With Rich Tutorials And Resources
Fast Getting Started With Raspberry Pi Pico And MicroPython Programming

What’s In The Kit

Raspberry Pi Pico With Pre-Soldered Header

A Low-Cost, High-Performance Microcontroller Board With Flexible Digital Interfaces

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
264KB of SRAM, and 2MB of on-board Flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 x12-bit ADC, 16 × controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
8 × Programmable I/O (PIO) state machines for custom peripheral support

ITEM	DESCRIPTION
LCD1602 RGB Module	LCD1602 RGB backlight character LCD, using I2C bus to display text or adjust RGB backlight
PIR motion sensor	Pyroelectric IR sensor, outputs electric switch signal when IR array from human/animal body is detected
8-Bit WS2812 RGB LED	8x RGB LED, play around with cool light effects by programming
Alarm	Quality active announciator, used for alarming or playing music
Single-joint potentiometer	Adjustable potentiometer, 0~10K range, used for ADC test, volume/brightness adjustment, etc.
Round buttons	Three colors, for button/switch detection
5mm LED	Three colors, for experiments like traffic light, PWM adjusted light, etc.
330R resistors	Providing current-limit protection when connected with LED in series
Breadboard and wires Jumper wires	Quality 830 breadboard and sorts of wires, easy for connecting components
Plastic box	Customized box for storing the modules and components