SunFounder NAS Kit
The NAS kit is composed with acrylic plates, dual fans, nas hat, micro sd card and so on. It allows you to DIY the shell of NAS Kit.
E-Ink screen
-24pin FPC interface for connecting the ink screen and 4 control keys,easy to use and read the data of Raspberry Pi CPU and disk usage.
Good Heat Dissipation
-Working automatically when the CPU temperature exceeds 54 degrees
OpenMediaVault
-NAS network based on OpenMediaVaul,Entered the management system by entering the IP address in the browser
Specification for E-Ink
- Working voltage:3.3 V
- Communication interface: 3-wireSPI, 4-wireSPI
- Dimensions: 59.2 mm x 29.2 mm x 1.05 mm
- Display size: 48.55 mm x 23.71 mm
- Pitch: 0.194 x 0.194
- Resolution: 250 x 122
- Display color: black and white
- Gray level: 2
- Global refresh: 2s
- Refresh function: 26.4 Mw (Typ.)
- Standby power consumption < 0.017 Mw
- Viewing angle > 170 °
- If the manual refresh mode is set, you will need to press OK to refresh.
- In auto mode, the E-Ink screen will refresh automatically every 500 ms;
Package List
- 1 x NAS HAT
- 3 x NAS 3 mm transparent acrylic
- 1 x Micro SD card (8 G)
- 1 x SATA to USB hard drive cable ( length 0.45 M)
- 1 x Screwdriver
- 4 x Silicone Pad
- 1 x Dual fan
- 3 x Heat sink
- 10 x M2 x 12 Screws
- 10 x M2 Nut
- 14x M3 x 8 mm Screws
- 10 x M2.5 x 6 mm Screws
- 6 x M3 x 26 mm Nylon Standoff
- 6 x M3 x 13 + 6 mm Single-pass Nylon Standoff
- 6 x M2.5 x 11 mm Nylon Standoff
- 6 x M2.5 x 8 + 6 mm single-pass Nylon Standoff