USB Cable to DB9 10cm

Chipi-X10 is CE and FCC approved and it is one of the easiest solutions to convert USB to RS232 Using DB9 connector and being powered by USB port, Chipi-X10 converter can be used with FTDI’s VCP drivers to provide a COM port on a PC capable of communication speeds with RS232 peripherals from 300baud to 250kBaud. The Chipi – X10 comes with a sculpted white matte plastic fitted case, which covers the electronics inside.

Technical characteristics :

• VCP and D2XX royalty-free drivers eliminate the need to develop a USB driver in most cases
• UART interface for 7 or 8 data bits, 1 or 2 stop bits and even / odd / mark / space / zero parity
• Fully Assisted Hardware or X-On / X-Off Synchro Software
• 512-byte receive buffer and 512-byte transmit buffer that use buffer smoothing technology
• Receiver buffer with adjustable delay
• Low USB usage and standby current
• Low USB bandwidth consumption
• Compatible USB 2.0 full speed
• Languette vers le haut libre
• Built-in MTP-ROM to store USB VID, PID, serial number and product description

Use of this device for life support and / or security applications is entirely at the risk of the user.

The CHIPI-X10 is a USB to UART Full Handshake cable at RS232 level with FT231X USB UART and RS232 FT3243S transceiver. It uses a minimum number of components for a USB to RS232 converter base designed using the FT231XS chip combined with an RS-232 level converter and some capacitors.