אודותינו ואודות הקהילה
חנות אלקטרוניקה למייקרים
מה שיש לנו לשתף בנוגע לציוד האלקטרוניקה שאנחנו מספקים למייקרים
- PACKAGE CONTENT
Weight: 0.043 kg
- 2.13inch Touch e-Paper HAT x1
- ABS case x1
- Screwdriver x1
- Thermal tape x1
- rubber feet 4PCS x1
- Screws x2
2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case
116.00₪ כולל מע"מ
2.13″ TOUCH E-PAPER WITH CASE. Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect. Specialized for Raspberry Pi Zero / Zero W.
אולי נוכל לעניין אותך במוצרים נוספים?
70.00₪ כולל מע"מ
למוצר זה יש מספר סוגים. ניתן לבחור את האפשרויות בעמוד המוצר 
טווח מחירים: 320.00₪ עד 1,390.00₪ כולל מע"מ
למוצר זה יש מספר סוגים. ניתן לבחור את האפשרויות בעמוד המוצר 
חדש
משלוח עד הבית UPS : עד 5 ימי עסקים
- Size
2.13″ - Resolution
250×122 - Viewing Angle
>170° - Display Color
Black and White - Grey Scale
2 - Touch Type
Capacitive - Touch Points
5-Points - Touch Port
I2C - Touch Panel
Toughened Glass - Communication
SPI - Power Consumption
Ultra Low - Display Duration
Persists without Power - Display Panel
E-paper - Experience
Paper-like - Comfortably Reading
Eye Care, No Bluelight - Environment
Ambient Light Required - Display Type
Passively Reflective - Refreshing
Partial Refresh Support - Enclosure
ABS Dull Polish
Features At A Glance
- 2.13″ capacitive touch e-Paper display, 5-point touch, 250×122 pixels
- Supports waken up by user-defined gesture
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
- Comes with development resources and manual (examples for Raspberry Pi)
Specifications
| OPERATING VOLTAGE | 3.3V | GREY SCALE | 2 |
|---|---|---|---|
| INTERFACE | 3-wire SPI, 4-wire SPI | PARTIAL REFRESH TIME | 0.3s |
| OUTLINE DIMENSIONS | 69.15 x38.90mm | FULL REFRESH TIME | 2s |
| DISPLAY SIZE | 48.55 x23.70mm | REFRESH POWER | 26.4mW(typ.) |
| DOT PITCH | 0.194 x0.194mm | STANDBY CURRENT | <0.01uA (almost none) |
| RESOLUTION | 250×122 pixels | VIEWING ANGLE | >170° |
| DISPLAY COLOR | black, white | TOUCH POINT | 5 (max) |
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Fine Design, Precise Cut-Out
Highly Aligned Connectors, Rounded Corner Design, Slant Sides For Easily Standing
Heat Dissipation Holes On The Back
Combined With Thermal Tape, Effective Heat Dissipation
Standard Raspberry Pi 40PIN GPIO Header
Compatible With Raspberry Zero / Zero W
Raspberry Pi in the photo is NOT included.
Demonstration
Pinout Definition
Outline Dimensions
How To Install
מוצרים קשורים
