Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports GPS, BeiDou, Glonass, LBS base station positioning
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Onboard CP2102 USB to UART converter, for serial debugging
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot, supports 1.8V/3V SIM card
- TF card slot for storing data like files, messages, etc.
- Onboard audio jack and audio decoder for making telephone call
- 2x LED indicators, easy to monitor the working status
- Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
- Baudrate: 300bps ~ 4Mbps (default: 115200bps)
- Autobauding baudrate: 9600bps ~ 115200bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Communications Specifications
LTE | WCDMA / TD-SCDMA / CDMA 2000 | EDGE | GSM/GPRS | ||
---|---|---|---|---|---|
Band | SIM7600A-H | LTE-FDD B2/B4/B12 | UMTS/HSPA+ B2/B5 | Not available | |
SIM7600E-H | LTE-FDD B1/B3/B5/B7/B8/B20 LTE-TDD B38/B40/B41 |
UMTS/HSPA+ B1/B5/B8 | GSM/GPRS/EDGE 900/1800 MHz | ||
SIM7600SA-H | LTE-FDD B1/B3/B5/B7/B8/B20 LTE-TDD B38/B40/B41 |
UMTS/HSPA+ B1/B5/B8 | GSM/GPRS/EDGE 850/900/1800/1900MHz | ||
SIM7600CE-T / CE-CNSE | LTE-TDD B38/B39/B40/B41 LTE-FDD B1/B3/B5/B8 |
UMTS/HSDPA/HSPA+ B1/B8 TD-SCDMA B34/B39 CDMA 1X/EVDO BC0 |
GSM/GPRS/EDGE 900/1800 MHz | ||
SIM7600G-H | LTE-TDD B34/B38/B39/B40/B41 LTE-FDD B1/B2/B3/B4/B5/B7/B8 /B12/B13/B18/B19/B20/B25/B26/B28/B66 |
UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19 | GSM/GPRS/EDGE 850/900/1800/1900MH | ||
Generation | 4G | 3G | 2.5G | 2G | |
Emitting power | 0.25W | 0.5W@EGSM900 0.4W@DCS1800 |
2W@GSM900 1W@DCS1800 |
||
Data Speed | LTE CAT 4 Uplink≤50 Mbps Downlink≤150 Mbps |
UMTS Uplink≤384Kbps Downlink≤384Kbps |
EDGE Uplink≤236.8kbps Downlink≤236.8kbps |
GPRS Uplink≤85.6kbps Downlink≤85.6kbps |
|
HSPA+ Uplink≤5.76Mbps Downlink≤42Mbps |
|||||
SIM Card | Normal SIM (Not Included) |
GNSS Specifications
- Receiver type
- 16-channel
- C/A code
- Sensitivity
- Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
- Cold starts: -148 dBm
- Time-To-First-Fix (open air)
- Cold starts: <35s
- Hot starts: <1s
- Accuracy
- Position: <2.5m CEP
SMS and Audio Specifications
- SMS
- Supported types: MT, MO, CB, Text, PDU
- Storage: USIM card and ME (default)
- Audio feature
- Supports echo cancellation
- Supports noise reduction
Other Specifications
- Power supply: 5V
- Operating voltage: 5V/3.3V (configured via jumper)
- Operating temperature: -30°C ~ 80°C
- Storage temperature: -45°C ~ 90°C
- Dimension: 56.21mm x 65.15mm
What’s on Board
- SIM7600SA-H
- CP2102 USB to UART converter
- NAU8810 audio decoder
- TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
- MP2128DT power chip
- MP1482 power chip
- Raspberry Pi GPIO header: for connecting with Raspberry Pi
- SIM7600 control interface: for connecting with host boards like Arduino/STM32
- SIM card slot: supports 1.8V/3V SIM card
- TF card slot: allows file/SMS/… storage
- 3.5mm earphone/mic jack
- USB interface: for testing AT Commands, getting GPS positioning data, etc.
- USB to UART interface: for serial debugging, or login to Raspberry Pi
- MAIN antenna connector
- AUX antenna connector
- GNSS antenna connector
- Power switch
- Network status indicator
- Power indicator
- UART selection jumper:
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART - PWR selection jumper:
PWR – 3V3: auto startup on power-up
PWR – D6: startup/shutdown by the Raspberry Pi D6 pin - Flight mode selection jumper:
NC by default, no flight mode control pin
Flight – D4: flight mode is controlled by the Raspberry Pi D4 pin - Operating voltage selection jumper:
VCCIO – 3.3V: set operating voltage as 3.3V
VCCIO – 5V: set operating voltage as 5V - USB connector solder pads
- BOOT forced programming solder pads
Dimension
- PACKAGE CONTENT
Weight: 0.252 kg
Note: the Raspberry Pi is NOT included.
- SIM7600SA-H 4G HAT x1
- LTE Antenna x1
- GPS External Antenna (B) x1
- USB type A plug to micro plug cable x2
- RPi screws pack (2pcs) x1
1